Menu

(AR05) "Gibson" style banjo armrest, 11", 18/24-bracket, nickel plated - 10.00

(AR05)
Click Image to Enlarge

Alternate Images

This is a modern variant of a classic armrest design; the top is flat with a rounded-off corner on the outside edge.


This item isn't really suitable for vintage restoration work.


The armrest is fixed on by the single leg being trapped against 2 tension hooks. There is a flat fixing bar which passes behind the hooks and the armrest is fixed to the bar with a fixing screw - the fixings are included with every armrest. The armrest will then sit reasonably comfortably on top of the tension ring - or a little higher, if preferred, depending on the exact configuration of the tension ring & brackets.


This armrest is designed for 11" diameter banjos (i.e. a 5 ½" radius to the curve) and it is quite difficult to fit it to a banjo which has a radius much different from 5 ½" - the leeway is perhaps 3/16" at most.


The dimensions (all approximate) of the armrest are:


180mm long x 20mm wide x 18mm deep except at the fixing points where it is 38mm deep


There are 2 pairs of fixing slots in the leg: one at approx 39mm centres (for 24 bracket banjos) and one at 50mm centres (for 18 bracket banjos). As there is often a little bit of "wiggle-room" on tension hooks, this armrest will fit a great many modern banjos.


If you need to work to precise measurements for a particular banjo, please e-mail your requirements - we can sometimes alter an armrest to give different clearances from those given above.

 
 
 Quantity:  

UK Web hosting and maintenance by bf internet