Menu

(CRD00) Banjo co-ordinator rod, nickel plated - 11" nominal - 8.00

(CRD00) Banjo co-ordinator rod, nickel plated - 11
Click Image to Enlarge

The dimensions are as follows:


Length: 11 1/16" (approx 282 mm) x 5/16" (approx 8mm) diameter  of which 1 7/8" (approx 48 mm) is externally threaded M8 x 1.25 pitch - the other end of the co-ordinator rod is tapped M6 x 1.0 pitch to a depth of about 1 ½" (approx 37 mm)


The standard lag bolt is 2 3/8" (approx 60mm) long - half the length is externally threaded M6 x 1.0 pitch, the other half is a coarse wood-screw thread (about a #14 woodscrew); pilot hole between 4.5 mm and 5.5 mm required, depending on the type of timber. Other lag bolts can be supplied if required - please e-mail


The rod is supplied with 1 lag bolt, an M6 (approx 12mm diameter) thrust washer, 2 x M8 external nuts (14 mm AF) and 2 x M8 external washers (approx 17 mm diameter)


Tailpiece brackets to fit over these rods will be found further down this list with the spare lag bolts and other odds & ends

 
 
 Quantity:  

UK Web hosting and maintenance by bf internet