A nice quality friction (un-geared) peg suitable for many banjos, ukulele banjos and ukuleles. Very robust and hard-wearing; a very suitable replacement tuner for lots of old instruments
These tuners are designed to fit pegheads from 6mm - 14mm thick appro. These dimensions can be modified by adding or removing washers and/or bushes and using set screws of different length. The shaft requires a 5mm diameter hole through the peghead. If you wish to use the bushes, the shaft holes needs to be counterbored to 7.5mm for a depth of 4mm from the face of the peghead. These dimensions work quite well for old instruments originally fitted with 1/8" diameter tuners - most of the original 1/8" diameter holes would be worn oval by now but reaming out to 5mm diameter will deal with all but the very worst of these.
Price shown includes VAT
Postage & packing is free on orders totalling £10 or more
Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout. You can combine any mix of products on this website to make up a £10 order.