(LB03) Banjo neck-fixing LAGBOLT M6 x 50mm - 1.00

(LB03) Banjo neck-fixing LAGBOLT M6 x 50mm
Click Image to Enlarge

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.

The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim. An internally-threaded co-ordinator rod can be fitted to the protruding end of the lagbolt with a suitable thrust washer to stop the end of the rod eating into the rim

Whilst you can secure this lagbolt without a co-ordinator rod (just using a simple hex nut), the next listing down this page is for a fitting with a decorative dome nut which looks nicer and is more commonly used for fixings without a co-ordinator rod

Here are the details and dimensions of this lagbolt - 50mm long, 25mm of which is threaded M6 x 1.0 pitch and 25mm of which has a #14 (approx) woodscrew thread

The lagbolt is supplied with 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).

Price shown includes VAT

Postage & packing is free on orders totalling £10 or more

Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.

You can combine any mix of products on this website to make up a £10 order.


UK Web hosting and maintenance by bf internet