Menu

(TU0105) Set of 5 chrome-plated banjo tuners with pearloid plastic buttons - 41.00

(TU0105) Set of 5 chrome-plated banjo tuners with pearloid plastic buttons
Click Image to Enlarge

Peghead shaft hole size = 9.6 mm


Peghead thickness - min = 12.5 mm


Peghead thickness - max = 16.5 mm


Gear housing size - diameter = 17.0 mm


Gear housing size - depth = 10.0 mm


String hole distance from back of peghead = 21.8 mm


Button distance from back of peghead = 40.0 mm


 


5th string dimensions:


Splined taper fitting - length = 12 mm


Tapering from 9.6 mm down to 8.6 mm


Gear housing 11.3 mm wide x 21.6mm high


Button distance from side of neck 35.5 mm


These dimensions are taken from actual products (rather than manufacturer's spec sheets) but individual items may slightly vary from this - it's impossible to check & verify every product before it goes out. These figures are therefore not guaranteed 100% accurate - if you have a specific requirement on sizes, please contact us before ordering.

 
 
  This product is currently out of stock

UK Web hosting and maintenance by bf internet