(RF12) Resonator wall lug, metric thread - 1.50

(RF12) Resonator wall lug, metric thread
Click Image to Enlarge

Full description & dimensions for resonator wall lug with threaded stud

This item is 10mm hexagonal section x approx 12mm long; it has two tapped (M4 x 0.7 pitch) holes at 60 degress to one another.One is close to the outer end of the fitting, the other is close to the resonator rim wall. The wall lug has a threaded stud (approx 6.5mm - 8mm long x M5 x 0.8 pitch) which screws directly into the resonator rim wall (always best to drill a pilot hole - and check the size on a piece of waste wood first - mahogany can be a great deal softer than maple). The length of the thread is easily shortened at need. If preferred, an M5 x 0.8 pitch captive thread can be installed to be used with this item. At the moment, captive threads are not included with this item but are available if required (please e-mail for details).


UK Web hosting and maintenance by bf internet