Menu

Tension rings & flanges

Please scroll down the list below. All the tension rings are listed first, followed by the flange plates & flanges.


Banjo tension ring - 8

Banjo tension ring - 8" x 3/8" deep, chrome-plated - 15.00

A basic chrome-plated tension ring as used on many entry-level uke and travel banjos.


The dimensions as as follows: 8" nominal size (approx 8 1/16" I.D. - 8 3/8" O.D.) Section approx 10mm x 4.5mm with "bullnose" profile. Best used with Tension hooks ref: HN00


The price shown includes VAT and postage & packing

To buy this product, click here


Banjo tension ring - 8

Banjo tension ring - 8" x 3/8" deep, nickel-plated - 15.00

A basic nickel-plated tension ring as used on many entry-level uke and travel banjos.


The dimensions as as follows: 8" nominal size (approx 8 1/16" I.D. - 8 3/8" O.D.) Section approx 10mm x 4.5mm with "bullnose" profile. Best used with Tension hooks ref: HN00


The price shown includes VAT and postage & packing

To buy this product, click here


Banjo tension ring - 11

Banjo tension ring - 11" x 3/8" deep, nickel-plated - 15.00

A basic nickel-plated tension ring as used on many entry-level banjos.


The dimensions as as follows: 11" nominal size (approx 11 1/16" I.D. - 11 3/8" O.D.) Section approx 10mm x 4.5mm with "bullnose" profile. Best used with Tension hooks ref: HN00, HN00A,


The price shown includes VAT and postage & packing

To buy this product, click here


Banjo tension ring, bevelled - 11

Banjo tension ring, bevelled - 11" x 5/16" deep, nickel-plated - 16.00

A bevelled nickel-plated tension ring as used on many entry-level banjos. The dimensions as as follows: The price shown includes VAT and postage & packing

To buy this product, click here


Banjo tension ring, 24-notch - 11

Banjo tension ring, 24-notch - 11" x ½" deep, nickel-plated - 35.00

A 24-notch nickel-plated tension ring as used on many intermediate-level banjos. The dimensions as as follows: I.D 11 1/16", O.D 11 3/8". Section approx ½" D x 3/16" T. The price shown includes VAT and postage & packing

To buy this product, click here


Banjo tension ring, grooved - 11

Banjo tension ring, grooved - 11" x ½" deep, nickel-plated - 30.00

A grooved nickel-plated tension ring as used on many intermediate-/professional-level banjos. The approximate dimensions as as follows:  Thickness 5mm at base, 2.1mm at top; Height 14.7mm at inside, 10.5mm on outside. The groove is quite shallow and suits our "Gibson" & "Vega" style flat hooks & nuts.


The price shown includes VAT and postage & packing

To buy this product, click here


Banjo flange plate set, 24-piece, nickel-plated

Banjo flange plate set, 24-piece, nickel-plated - 24.00

A set of 24 individual flange plates designed to be fitted to 11" banjos with 24 bracket shoes. The set includes 2 "half-plates" to go one either side of the neck. If neatly fitted, these plates create the impression of a continuous flange. The dimensions as as follows: The price shown includes VAT and postage & packing

To buy this product, click here


Banjo flange plate set, 2-piece, nickel-plated

Banjo flange plate set, 2-piece, nickel-plated - 18.00

A set of 2 flange plates designed to be fitted to 11" banjos with 24 bracket shoes. Please click on the line above for dimensions


The price shown includes VAT and postage & packing

To buy this product, click here


Banjo flange plate, 1-piece, chrome-plated

Banjo flange plate, 1-piece, chrome-plated - 20.00

A single flange plate designed to be fitted to 11" banjos with 24 bracket shoes. The dimensions as as follows: The price shown includes VAT and postage & packing

To buy this product, click here


Banjo 1-piece cast flange, nickel-plated

Banjo 1-piece cast flange, nickel-plated - 30.00

A cast one-piece flange designed to be fitted to 11" banjos instead of bracket shoes. Please check the size carefully; it's different from the following item. The dimensions as as follows: External diameter: 335 mm (approx) Thickness at outer rim: 3mm (approx) Internal diameter at base of central boss: 273mm (approx) Thickness at central boss: 12mm (approx) Rebate in central boss to accommodate rim: 7mm deep x 3mm wide This item is intended for new work and your rim should be turned to fit the actual flange you will be using If using this item as a replacement on an existing instrument, you should be prepared to do some adjustment to the woodwork to ensure a snug fit The price shown includes VAT and postage & packing

To buy this product, click here


The above listing is not necessarily exhaustive.  Whilst every effort is made to ensure that all the listed items are in stock, availability is subject to prior sale.
You can phone to check this - and also to see what else I have in stock today.

Click here for news, information & special offers from andybanjo

Click here to return to home page

At the present time, we only ship to addresses in the UK and the Republic of Ireland
If you have any queries or questions about particular instruments in this catalogue, please feel free to contact us.

UK Web hosting and maintenance by bf internet