Menu

Misc. Banjo Hardware

Misc. Banjo Hardware - a mixed bag; fretwire, lagbolts, nuts & bolts, tailpiece hangers etc etc Best to browse, really .......


(FW01) 12

(FW01) 12" length of vintage-style banjo fretwire - 2.00

This is a 12" length of best quality nickel-silver fretwire. Traditional "mushroom" shape with a barbed tang. The tang is 0.054" deep and is designed to grip in a fret slot approx 0.023" - 0.024" wide. The crown of the fret is approx 0.037" high by 0.053" wide and is broadly semi-circular in section. This fretwire is a reasonably close approximation to the types of fretwire found on many vintage banjos. Each 12" length will do around 6 - 8 frets.


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more - Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(FW02) 12

(FW02) 12" length of modern-style banjo fretwire - 2.00

This is a 12" length of best quality nickel-silver fretwire. Traditional "mushroom" shape with a barbed tang. The tang is 0.062" deep and is designed to grip in a fret slot approx 0.023" - 0.024" wide. The crown of the fret is approx 0.040" high by 0.080" wide and is broadly semi-circular in section. This fretwire is a reasonably close approximation to the types of fretwire found on many modern banjos. Each 12" length will do around 6 -8 frets.


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more - Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB01) Banjo neck-fixing LAGBOLT M6 x 40mm

(LB01) Banjo neck-fixing LAGBOLT M6 x 40mm - 1.00

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim. An internally-threaded co-ordinator rod can be fitted to the protruding end of the lagbolt with a suitable thrust washer to stop the end of the rod eating into the rim


Whilst you can secure this lagbolt without a co-ordinator rod (just using a simple hex nut), the next listing down this page is for a fitting with a decorative dome nut which looks nicer and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 40mm long, 15mm of which is threaded M6 x 1.0 pitch and 25mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB02) Banjo neck-fixing LAGBOLT M6 x 40mm with dome nut

(LB02) Banjo neck-fixing LAGBOLT M6 x 40mm with dome nut - 1.50

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim.


This fitting is designed so you can secure the lagbolt without a co-ordinator rod using a decorative dome nut with a suitable thrust washer. This which looks nicer than a simple hex nut and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 40mm long, 15mm of which is threaded M6 x 1.0 pitch and 25mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 1 x M6 dome nut, 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB03) Banjo neck-fixing LAGBOLT M6 x 50mm

(LB03) Banjo neck-fixing LAGBOLT M6 x 50mm - 1.00

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim. An internally-threaded co-ordinator rod can be fitted to the protruding end of the lagbolt with a suitable thrust washer to stop the end of the rod eating into the rim


Whilst you can secure this lagbolt without a co-ordinator rod (just using a simple hex nut), the next listing down this page is for a fitting with a decorative dome nut which looks nicer and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 50mm long, 25mm of which is threaded M6 x 1.0 pitch and 25mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB04) Banjo neck-fixing LAGBOLT M6 x 50mm with dome nut

(LB04) Banjo neck-fixing LAGBOLT M6 x 50mm with dome nut - 1.50

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim.


This fitting is designed so you can secure the lagbolt without a co-ordinator rod using a decorative dome nut with a suitable thrust washer. This which looks nicer than a simple hex nut and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 50mm long, 25mm of which is threaded M6 x 1.0 pitch and 25mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 1 x M6 dome nut, 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB05) Banjo neck-fixing LAGBOLT M6 x 60mm

(LB05) Banjo neck-fixing LAGBOLT M6 x 60mm - 1.00

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim. An internally-threaded co-ordinator rod can be fitted to the protruding end of the lagbolt with a suitable thrust washer to stop the end of the rod eating into the rim


Whilst you can secure this lagbolt without a co-ordinator rod (just using a simple hex nut), the next listing down this page is for a fitting with a decorative dome nut which looks nicer and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 60mm long, 30mm of which is threaded M6 x 1.0 pitch and 30mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB06) Banjo neck-fixing LAGBOLT M6 x 60mm with dome nut

(LB06) Banjo neck-fixing LAGBOLT M6 x 60mm with dome nut - 1.50

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim.


This fitting is designed so you can secure the lagbolt without a co-ordinator rod using a decorative dome nut with a suitable thrust washer. This which looks nicer than a simple hex nut and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 60mm long, 30mm of which is threaded M6 x 1.0 pitch and 30mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 1 x M6 dome nut, 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB07) Banjo neck-fixing LAGBOLT M6 x 50mm

(LB07) Banjo neck-fixing LAGBOLT M6 x 50mm - 1.00

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim. An internally-threaded co-ordinator rod can be fitted to the protruding end of the lagbolt with a suitable thrust washer to stop the end of the rod eating into the rim


Whilst you can secure this lagbolt without a co-ordinator rod (just using a simple hex nut), the next listing down this page is for a fitting with a decorative dome nut which looks nicer and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 50mm long, 10mm of which is threaded M6 x 1.0 pitch. 5mm of which is plain and 35mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


This type is particularly useful for replacing simple woodscrew neck fastenings in vintage zither & conventional banjos


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(LB08) Banjo neck-fixing LAGBOLT M6 x 50mm with dome nut

(LB08) Banjo neck-fixing LAGBOLT M6 x 50mm with dome nut - 1.50

This is the metal fitting that connects a banjo neck to its rim. It has a machine-screw thread at one end and a woodscrew thread at the other - it's sometimes called a "wood-to-metal" dowel.


The woodscrew-threaded end is screwed into the heel of the neck and the machine-screw-threaded passes through a hole in the rim.


This fitting is designed so you can secure the lagbolt without a co-ordinator rod using a decorative dome nut with a suitable thrust washer. This which looks nicer than a simple hex nut and is more commonly used for fixings without a co-ordinator rod


Here are the details and dimensions of this lagbolt - 50mm long, 10mm of which is threaded M6 x 1.0 pitch. 5mm of which is plain and 35mm of which has a #14 (approx) woodscrew thread


The lagbolt is supplied with 1 x M6 dome nut, 2 x M6 hex nuts (which you can lock together to drive the lagbolt into a pre-drilled pilot hole in the heel of the neck) and 2 different M6 thrust washers (12mm & 18mm O.D. respectively).


This type is particularly useful for replacing simple woodscrew neck fastenings in vintage zither & conventional banjos


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(BB01) Rectangular bone blank to make banjo top nut #1

(BB01) Rectangular bone blank to make banjo top nut #1 - 2.00

Rectangular bone blank for making a new top nut for your banjo - sizes approx 12mm high x 3.25 mm thick x 50mm  long


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(BB02) Rectangular bone blank to make banjo top nut #2

(BB02) Rectangular bone blank to make banjo top nut #2 - 2.00

Rectangular bone blank for making a new top nut for your banjo - sizes approx 11mm high x 5 mm thick x 55mm long


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


(BB03) Rectangular bone blank to make banjo top nut #3

(BB03) Rectangular bone blank to make banjo top nut #3 - 2.00

Rectangular bone blank for making a new top nut for your banjo - sizes approx 12mm high x 6 mm thick x 40mm long


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout.


You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


Tailpiece hanger bracket - chrome plated

Tailpiece hanger bracket - chrome plated - 2.00

Chrome Plated


A simple L-shaped tailpiece hanger bracket. The bracket is 15mm wide and is made from 2mm thick steel


The vertical leg is 18mm long and has a central 8.2mm diameter hole - the horizontal leg is 20mm long and has a 9.5mm x 4.25mm slot approx 3mm in from the rounded end


Price shown includes VAT


Postage & packing is free on orders totalling £10 or more


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout. You can combine any mix of products on this website to make up a £10 order.

To buy this product, click here


Tailpiece hanger bracket - nickel plated

Tailpiece hanger bracket - nickel plated - 2.00

Nickel plated.


A simple L-shaped tailpiece hanger bracket. The bracket is 15mm wide and is made from 2mm thick steel


 


The vertical leg is 18mm long and has a central 8.2mm diameter hole - the horizontal leg is 20mm long and has a 9.5mm x 4.25mm slot approx 3mm in from the rounded end


 


Price shown includes VAT


 


Postage & packing is free on orders totalling £10 or more


 


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout. You can combine any mix of products on this website to make up a £10 order.


 


 

To buy this product, click here


Perch Pole hardware set

Perch Pole hardware set - 35.00

Consists of neck brace with 2 different length tensioning screws, ferrule and end bolt - all nickel plated

To buy this product, click here


Replacement armrest fixing - chrome

Replacement armrest fixing - chrome - 3.00

A simple replacement for many types of "Gibson-style" armrest


Please click on the line above for dimensions


Price shown includes VAT

 


Postage & packing is free on orders totalling £10 or more

 


Orders under £10 in total are subject to a £3 Postage & packing/handling charge which will be added at the checkout. You can combine any mix of products on this website to make up a £10 order.

 


To buy this product, click here


The above listing is not necessarily exhaustive.  Whilst every effort is made to ensure that all the listed items are in stock, availability is subject to prior sale.
You can phone to check this - and also to see what else I have in stock today.

Click here for news, information & special offers from andybanjo

Click here to return to home page

At the present time, we only ship to addresses in the UK and the Republic of Ireland
If you have any queries or questions about particular instruments in this catalogue, please feel free to contact us.

UK Web hosting and maintenance by bf internet