Peghead shaft hole size = 9.5 mm
Peghead thickness - min = 13.5 mm
Peghead thickness - max = 17.0 mm
Gear housing size - diameter = 16.0 mm
Gear housing size - depth = 9.6 mm
String hole distance from back of peghead = 22.0 mm
Button distance from back of peghead = 39.0 mm
These dimensions are taken from actual products (rathe rthan manufacturer's spec sheets) but individual items may slightly vary from this - it's impossible to check & verify every product before it goes out. These figures are therefore not guaranteed 100% accurate - if you have a specific requiremen ton sizes, please contact us before ordering.